2002 Nissan Sentra

Canadian MSRP
$15,598 - $21,498
2002 Nissan Sentra

Key Specifications for 2002 Nissan Sentra

Fuel Economy 6.1 - 10.8 City/HWY combined
Horsepower 126 - 175 hp
Drivetrain Front-Wheel Drive
Engine Gasoline
Torque 129 - 180 ft-lb
Seats 5

Review & Compare:
2002 Nissan Sentra Trims

The 2002 Nissan Sentra has 7 trims. Below you will be able to review all the trims with the option to compare.
7 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2020-590
Recall date
2020-12-02
System affected
Airbag
Model year(s) affected
2002 2003 2004 2005 2006
Manufacturer Recall Number:
Units Affected:
656
Notification Type:
Safety Mfr
Issue: This recall is for certain vehicles that had an airbag inflator inspection as a part of Transport Canada Recall No. 2015-210, but the airbag inflator was not replaced. This recall will re-inspect the airbag inflator and provides a replacement of the inflator, if needed. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2020-003
Recall date
2020-01-10
System affected
Airbag
Model year(s) affected
2002 2003 2004 2005 2006
Manufacturer Recall Number:
Units Affected:
36,217
Notification Type:
Safety Mfr
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2014-272
Recall date
2014-07-02
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
R1302 (Nissan), R1303 (Infiniti)
Units Affected:
20,412
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall supersedes recall 2013117. Vehicles corrected as part of the previous campaign will require re-inspection and/or repair.
Recall number
2013-117
Recall date
2013-04-11
System affected
Airbag
Model year(s) affected
2002 2003
Manufacturer Recall Number:
R1302 (Nissan), R1303 (Infiniti)
Units Affected:
55,824
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator.
Recall number
2007-364
Recall date
2007-11-13
System affected
Engine
Model year(s) affected
2002 2005 2006
Manufacturer Recall Number:
R126
Units Affected:
40,666
Notification Type:
Safety TC
On certain vehicles equipped with a 2.5L engine, the crank angle sensor can malfunction causing the engine to stall. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will reprogram the Electronic Control Module (ECM) to prevent stalling.
Recall number
2003-285
Recall date
2003-11-13
System affected
Electrical
Model year(s) affected
2000 2001 2002 2003
Manufacturer Recall Number:
R87
Units Affected:
52,158
Notification Type:
Safety Mfr
On certain vehicles, the foam material used for the interior lining of the Engine Control Module (ECM) box out-gasses sulphur as it cures. If one of the resistors inside the ECM has a crack on the surface coating, the gas may cause corrosion of the resistor. This could cause the Malfunction Indicator Light to come on, poor drivability (idle instability, poor acceleration), or the engine to stop running without warning during vehicle operation. Correction: Dealer will remove the inside lining material from the ECM box.
Recall number
2003-267
Recall date
2003-11-05
System affected
Engine
Model year(s) affected
2000 2001 2002 2003
Manufacturer Recall Number:
R86
Units Affected:
74,143
Notification Type:
Safety Mfr
On certain vehicles, the circuit board for the crank position sensor may have an improper solder joint. This could cause the Service Engine Soon warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation. Correction: Dealers will replace the crankshaft position sensor and both camshaft position sensors.
Recall number
2003-060
Recall date
2003-03-10
System affected
Engine
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
R80
Units Affected:
30,589
Notification Type:
Safety Mfr
On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road which could be ignited by contact with the main catalyst. Correction: Dealer will remove the protruding portion of the exhaust pipe hanger pin. Also, certain operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate. If substrate particles enter the combustion chamber, they may score the cylinder walls, resulting in increased oil consumption. If the engine oil level is not checked on a periodic basis, engine damage may occur which could result in fire. Correction: Dealer will reprogram the engine control unit to prevent the possibility of the pre-catalyst overheating. If the conversion efficiency of the pre-catalyst has deteriorated, then the catalyst will be replaced. The original pre-catalyst will then be inspected for evidence of damage to the catalyst substrate. If damage is present, the vehicle engine will be replaced.
Recall number
2001-291
Recall date
2001-12-11
System affected
Lights And Instruments
Model year(s) affected
2001 2002
Manufacturer Recall Number:
R67
Units Affected:
27,607
Notification Type:
Safety Mfr
Certain passenger vehicles fail to comply with requirements of C.M.V.S.S. no. 108, "lamps, reflective devices, and associated equipment." these vehicles were missing tamperproof caps that prevent horizontal headlamp adjustment these caps are installed to prevent maladjustment of the headlamps. Correction: dealers will install a tamperproof cap over the horizontal adjustment screw for both headlamps.

Similar Vehicles

Select Another Vehicle
Search now