Nissan Sentra

Issue: On certain cars, the right headlamp was not properly aligned when it was assembled. This could cause reduced visibility while driving at night. Note: This recall only affects cars equipped with LED headlamps. Safety Risk: Headlamps that are not properly aimed could cause reduced visibility and increase the risk of a crash. Corrective Actions: Nissan will notify owners by mail and instruct you to take your car to a dealer to replace the right headlamp.

Issue: This recall is for certain vehicles that had an airbag inflator inspection as a part of Transport Canada Recall No. 2015-210, but the airbag inflator was not replaced. This recall will re-inspect the airbag inflator and provides a replacement of the inflator, if needed. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

On certain vehicles equipped with a mechanical key ignition system, a spring in the ignition switch could wear and break. This may allow the ignition key to inadvertently move from the ON position to the accessory (ACC) position while driving, causing the engine to shut off and the airbag system to lose power. The resulting loss of motive power, and change in steering and brake forces could increase the risk of a crash causing injury and/or damage to property. Additionally, in the event of a crash, this may also cause the airbags not to function. Correction: Dealers will inspect the lot number of the ignition switch, and replace it with a new one if it is affected. Note: Until the correction is performed, owners are advised to remove all objects from the ignition key ring, such as additional keys, key chains, etc.

On certain vehicles, the passenger's frontal airbag may not deploy correctly due to an issue in manufacturing. As a result of long-term storage, there could be insufficient compression strength of the coolant within the inflator housing of the passenger's frontal airbag, which may cause the airbag to fail to deploy properly in the event of a crash (where deployment is warranted), which could increase the risk of injury to the front passenger occupant. Correction: Dealers will replace the passenger's frontal airbag inflator.

On certain vehicles, a defect in the occupant classification system could allow an adult sitting in the front passenger seat to be classified as a child or an “empty seat”. This would suppress the airbag, which could increase the risk of injury in a crash. Correction: For affected Altima, Maxima, Murano, Rogue and Sentra vehicles, dealers will reprogram the airbag control unit and the occupant classification system control unit. For affected Leaf, NV200, Pathfinder, Q50 and JX35/QX60 vehicles, dealers will replace the occupant classification system electronic control unit.

Certain vehicles serviced as part of recall 2014-093 or which had the Occupant Classification System (OCS) module replaced during servicing may have been fitted with an incorrect replacement OCS module. An incorrect OCS module would impair the effectiveness of the OCS, potentially failing to properly classify an adult passenger seated in the front passenger seat. This could increase the risk of injury to the occupant in a crash. Correction: Dealers will reprogram the OCS module.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This is an expansion of recalls 2013117 and 2014566.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall supersedes recall 2013117. Vehicles corrected as part of the previous campaign will require re-inspection and/or repair.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator.

On certain vehicles, the fuel tank may have been manufactured incorrectly and could leak (when full). Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the fuel tank.

On certain vehicles, a machining irregularity of bolt/washer surface on the positive battery terminal cable end may allow for a gap to occur in the contact area of the terminal. This could result in a voltage drop that may cause difficulty starting the vehicle and could result in damage to the Engine Control Module (ECM). This issue may also cause the engine to stop running while the vehicle is in motion at low speed, which could result in a crash. Correction: Dealers will replace the positive battery terminal cable end.

On certain vehicles, one or both of the side curtain airbags may have been incorrectly positioned during vehicle assembly. If this occured, in certain types of crashes where side curtain airbag deployment is expected, a portion of the bag may be restricted from fully deploying. The side curtain airbag will still timely deploy, meet and exceed applicable safety standards. Correction: Dealers will inspect and, if necessary, reposition the curtain airbag. This action is deemed a voluntary service campaign and is not being conducted under the Motor Vehicle Safety Act.

On certain vehicles equipped with a 2.5L engine, the crank angle sensor can malfunction causing the engine to stall. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will reprogram the Electronic Control Module (ECM) to prevent stalling.

Certain vehicles equipped with a four cylinder 2.5L engine may exhibit excessive oil consumption as a result of improper piston rings. If the oil level is not maintained engine damage can occur and could result in an engine fire. Correction: Dealers will reprogram the Engine Control Module (ECM) and, if required, replace the engine.

On certain vehicles, the foam material used for the interior lining of the Engine Control Module (ECM) box out-gasses sulphur as it cures. If one of the resistors inside the ECM has a crack on the surface coating, the gas may cause corrosion of the resistor. This could cause the Malfunction Indicator Light to come on, poor drivability (idle instability, poor acceleration), or the engine to stop running without warning during vehicle operation. Correction: Dealer will remove the inside lining material from the ECM box.

On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road which could be ignited by contact with the main catalyst. Correction: Dealer will remove the protruding portion of the exhaust pipe hanger pin. Also, certain operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate. If substrate particles enter the combustion chamber, they may score the cylinder walls, resulting in increased oil consumption. If the engine oil level is not checked on a periodic basis, engine damage may occur which could result in fire. Correction: Dealer will reprogram the engine control unit to prevent the possibility of the pre-catalyst overheating. If the conversion efficiency of the pre-catalyst has deteriorated, then the catalyst will be replaced. The original pre-catalyst will then be inspected for evidence of damage to the catalyst substrate. If damage is present, the vehicle engine will be replaced.

Certain passenger vehicles equipped with a 1.8-liter engine. The engine could stop running while being driven due to a defective crank position sensor. This could also result in the "service engine soon" warning light coming on or reduced engine power. If the engine stops running while driving, this could result in a crash. Correction: dealers will replace the crank position sensors.

On certain vehicles, one or more of the three bolts used to attach each front suspension lower control arm to the body on the left and right sides may not have been properly heat treated when manufactured. The bolts could fracture, increasing the risk of a crash. Correction: Dealers will replace the lower control arm attachment bolts.