A fun car to drive, hugs corners, tight steering, awesome acceleration, head turner if that matters, good mileage when compared to comparable cars or trucks
Issue:
On certain vehicles, the fuel pump mounting ring on the fuel tank could crack and create a fuel leak.
Safety Risk:
A fuel leak can create the risk of a fire.
Corrective Actions:
Mazda will notify owners by mail and instruct you to take your vehicle to a dealer to install a new fuel pump ring. A thermal insulation pad will also be installed on the fuel tank of RX-8 vehicles.
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2018-038 and 2018-584 (Mazda Recall 2018A). Vehicles repaired under the previous recalls do not require repair under this recall.
Note: This recall is superseded by recall 2019496. Please see recall 2019496 for more information.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This is an expansion of recall 2018-038.
Note: This recall is superseded by recall 2019496. Please see recall 2019496 for more information.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes recalls 2016-259 (Mazda Recall 9416E) and 2017-011 (Mazda Recall 0617A) for RX-8 models only. RX-8 model vehicles completed under those two recalls do not need to be completed under recall 2018-038 (Mazda Recall 2018A).
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the driver frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes recall 2015-247 (Mazda Recall 8215F). Vehicles completed under 2015-247 do not need to be completed under recall 2018-036.
On certain vehicles, the fuel pump discharge pipe may crack and cause a fuel leak. A fuel leak in the presence of an ignition source could result in a fire, increasing the risk of injury and/or damage to property. Correction: Dealers will replace the fuel filter body with an improved part.
On certain vehicles, the ball joint socket area on the front lower control arm may become cracked due to an inappropriate manufacturing process of the ball joint. If a large load is applied to the suspension while driving, the ball joint may suddenly separate from the socket, which could result in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the lower control arms with modified parts.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: The recall for the 2005-2008 RX-8 models has been superseded by recall 2018038 (Mazda Recall 2018A), and the recall for the 2005-2006 MPV models has been superseded by recall 2018578 (Mazda Recall 2618F).
On certain vehicles, the fuel pump sealing rings may deteriorate from being exposed to heat from the engine and exhaust pipe. Over time, this could cause the fuel pump rings to crack, which could result in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the fuel pump rings with new parts and add additional insulation to the fuel tank.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: The recall for the 2004 RX-8 model has been superseded by recall 2018-038 (Mazda Recall 2018A), and the recall for the 2004 MPV model has been superseded by recall 2018578 (Mazda Recall 2618F).
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the airbag module. Note: This recall is superseded by recall 2018-036. Please see recall 2018-036 for more information. Click here for more information.
Mazda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Mazda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Campaign is superseded by recall 2015-247 (Mazda Recall 8215F). Please see recall 2015247 for more information.
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013112.
On certain vehicles, improper forging of the front lower control arms may allow cracks in the ball joint socket to form. As a result, the ball stud may separate from the control arm, which could cause a loss of vehicle control and a crash. Correction: Dealers will inspect and, if necessary, replace both front lower control arms.
On certain vehicles, if while parked the engine is operated at high RPM's for an excessive length of time, some parts around the exhaust system can melt and produce a variety of malfunctions. The problems caused by the excessive heat build-up can range from an inoperative oxygen sensor, neutral switch and back-up lights, problems with the parking brakes, malfunctions of the gas gauge, and in the worst case, possible leaks from the fuel tank. Fuel leakage in the presence of an ignition source could result in a fire. Correction: Dealers will reprogram the Powertrain Control Module, install a heat insulator pad on the fuel tank, and inspect various components for heat damage.
On certain vehicles, the dynamic damper heat insulator on the manual transmission may crack. Should the driver continue to operate the vehicle with a cracked insulator on the dynamic damper, the insulator may drop from the vehicle and present a safety hazard to a following vehicle. Correction: Dealer will install a modified damper.
On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.
Subscribe for the latest car reviews, listings, products and more right in your inbox.
By clicking 'Subscribe', I agree to receive communications from AutoTrader. I can unsubscribe at anytime. I also agree to the Terms of Use and Privacy Policy.