Review: 2010 Lexus IS F Trim
The 2010 Lexus IS F has 1 trim. Below you will be able to review this trim in detail.
Filter by category
1 trim available
Back to login
2010 Lexus IS F
Canadian MSRP
$68,000
Key Specifications for 2010 Lexus IS F
Fuel Economy
8.5 - 13.0 City/HWY
combined
Horsepower
416 hp
Drivetrain
Rear-Wheel Drive
Engine
Gasoline
Torque
371 ft-lb
Seats
4
Select 1 more trim
Are you sure you want to cancel your trim comparison?
eee
Engine
Fuel System
Torque Blurb!
Photos
AutoTrader Review
N/A
This vehicle has not yet been reviewed
Reviews and News
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2021-723
Recall date
2021-11-24
System affected
Accessories
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014
Manufacturer Recall Number:
SRC XC8/XC9 / SRC RC8/RC9 / SRC RD1/RD2
Units Affected:
51,373
Notification Type:
Safety Mfr
Issue:
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.
On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt.
Note: This recall only affects the following block heater/cord part numbers:
C014003034 PK5A408J09 PU14000904
C014003151 PK5A408J13 PU14000905
C014000885 PK5A489J11 PU14000907
C014000888 PK5A489J22 PU14000909
C014000907 PK5A410H00 PU14000911
C014100904 PU14000900 PU14000913
C014100907 PU14000901 PU14003571
C014100911 PU14000902
PK5A408J05 PU14000903
Safety Risk:
Engine block heater wiring that overheats or melts could create the risk of a fire.
Corrective Actions:
Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Recall number
2019-008
Recall date
2019-01-09
System affected
Airbag
Model year(s) affected
2010 2011 2012 2013 2014
Manufacturer Recall Number:
SRC R75 / SRC R76
Units Affected:
376,282
Notification Type:
Safety Mfr
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2014-458
Recall date
2014-10-16
System affected
Fuel Supply
Model year(s) affected
2006 2007 2008 2009 2010 2011
Manufacturer Recall Number:
SSC255
Units Affected:
18,949
Notification Type:
Safety Mfr
On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.
Recall number
2013-031
Recall date
2013-01-30
System affected
Visual System
Model year(s) affected
2008 2009 2010 2011
Manufacturer Recall Number:
SSC189
Units Affected:
16,756
Notification Type:
Safety Mfr
On certain vehicles, the wiper arm securing nuts could have been insufficiently tightened during assembly. If the movement of the wipers is restricted by an external load, such as heavy snow on the windshield, the wiper arms could slip and one or both wipers could become inoperative. If this occurs, driver visibility could be reduced, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will clean the mating surface of the wiper arm and motor shaft and install improved wiper arm nuts.
Recall number
2009-290
Recall date
2009-10-07
System affected
Other
Model year(s) affected
2006 2007 2008 2009 2010
Manufacturer Recall Number:
011, 014, 030, 093, 083, 041, 084, 086, 081, 088
Units Affected:
437,445
Notification Type:
Safety TC
On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.
Similar Vehicles
Select Another Vehicle