2010 Infiniti QX56

Canadian MSRP
$73,000
2010 Infiniti QX56

Key Specifications for 2010 Infiniti QX56

Fuel Economy 11.8 - 17.3 City/HWY combined
Horsepower 320 hp
Drivetrain Four-Wheel Drive
Engine Gasoline
Torque 393 ft-lb
Seats 7 - 8
 

Review & Compare:
2010 Infiniti QX56 Trims

The 2010 Infiniti QX56 has 2 trims. Below you will be able to review all the trims with the option to compare.
2 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2012-156
Recall date
2012-04-11
System affected
Label
Model year(s) affected
2004 2005 2006 2007 2008 2009 2010
Manufacturer Recall Number:
Units Affected:
4,885
Notification Type:
Compliance Mfr
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 210.1 - User-ready Tether Anchorages for Restraint Systems. Specifically, the pictograms identifying the location of the tether anchors measure 15 mm in height instead of 20 mm as required by the Standard. Correction: Since this non-compliance condition does not pose any safety risk, no corrective action is required.
Recall number
2010-159
Recall date
2010-05-26
System affected
Suspension
Model year(s) affected
2010
Manufacturer Recall Number:
R160, R161
Units Affected:
2,759
Notification Type:
Safety Mfr
On certain vehicles, the lower control link assembly collars (forming the inboard attachment point to the chassis) may not have been manufactured correctly. If the collar weld fails, the cylindrical collar can open, which will allow the collar to slip over the mounting bolt and bushing. This may change the wheel camber, which could allow vehicle handling characteristics to deteriorate, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the lower control link assembly.
Recall number
2010-088
Recall date
2010-03-24
System affected
Powertrain
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
660
Notification Type:
Service Campaign Mfr
On certain four-wheel drive vehicles, the joint portion of the front driveshaft may contain small cracks. These cracks may eventually lead to a failure, resulting in separation of the front driveshaft. If the driveshaft failed while the vehicle was moving, a loud noise would be heard. If the vehicle were in 2WD mode, the driveshaft would come to rest on the frame cross-member, and the vehicle could be operated normally. The driveshaft would not come in contact with brake, steering or fuel system components, therefore the risk of a crash is considered minimal. Correction: Dealers will inspect the vehicle and replace the front driveshaft if necessary.
Recall number
2010-062
Recall date
2010-03-03
System affected
Brakes
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
R154, R155
Units Affected:
6,246
Notification Type:
Safety Mfr
On certain vehicles, the brake pedal pivot pin end was not properly manufactured. As a result, the pin may not remain in place, causing the brake pedal to partially disengage from the brake pedal bracket. If this occurs, the driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force. A reduction in braking force may lead to increased stopping distances and the risk of a crash causing property damage, personal injury or death. Correction: Owners of all potentially affected vehicles will be contacted and their brake pedal assembly will be inspected and replaced if necessary.

Similar Vehicles

Select Another Vehicle
Search now