2010 Honda CR-V

Canadian MSRP
$26,290 - $35,590
2010 Honda CR-V

Key Specifications for 2010 Honda CR-V

Fuel Economy 7.1 - 10.1 City/HWY combined
Horsepower 180 hp
Drivetrain Front-Wheel Drive, Four-Wheel Drive
Engine Gasoline
Torque 161 ft-lb
Seats 5
 

Review & Compare:
2010 Honda CR-V Trims

The 2010 Honda CR-V has 6 trims. Below you will be able to review all the trims with the option to compare.
6 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2023-187
Recall date
2023-03-30
System affected
Structure
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
HP40
Units Affected:
110,504
Notification Type:
Safety Mfr
Issue: On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. Note: This recall replaces recall HN70 (Transport Canada Recall No. 2019-025). Vehicles that were inspected or repaired under that recall also require this second inspection and repair. Safety Risk: A rear trailing arm that separates could cause a loss of control and increase the risk of a crash. Corrective Actions: Honda will notify owners by mail and instruct you to take your vehicle to a dealership for an inspection of the rear frame stiffeners. If the vehicle passes the inspection, the dealer will install a brace. For a vehicle that does not pass the inspection, Honda will repurchase the vehicle. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.
Recall number
2019-420
Recall date
2019-08-21
System affected
Other
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
Units Affected:
5,327
Notification Type:
Compliance Mfr
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Recall number
2019-025
Recall date
2019-01-17
System affected
Structure
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
HN70
Units Affected:
83,953
Notification Type:
Safety Mfr
Issue: On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear-trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador). Safety Risk: A rear-trailing arm that separates could cause a loss of control and increase the risk of a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection of the rear frame stiffeners. If the vehicle passes the inspection, dealers will apply corrosion protection. For a vehicle that does not pass the inspection, Honda will repurchase the vehicle. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.
Recall number
2018-523
Recall date
2018-09-27
System affected
Airbag
Model year(s) affected
2010 2011
Manufacturer Recall Number:
Units Affected:
263,289
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator.
Recall number
2016-046
Recall date
2016-02-01
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
Units Affected:
269,201
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2011-286
Recall date
2011-08-05
System affected
Powertrain
Model year(s) affected
2007 2008 2009 2010
Manufacturer Recall Number:
HL27, HL24
Units Affected:
135,142
Notification Type:
Safety Mfr
On certain vehicles, the secondary shaft bearing in the automatic transmission may fail. This could cause abnormal noise, the malfunction indicator lamp to turn ON, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission, resulting in a short circuit that causes the engine to stall. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Additionally, broken pieces may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the PARK position. These issues could result in property damage and/or personal injury. Correction: Dealers will update the automatic transmission control module software.
Recall number
2011-013
Recall date
2011-01-11
System affected
Electrical
Model year(s) affected
2010
Manufacturer Recall Number:
HL09
Units Affected:
1
Notification Type:
Safety Mfr
On certain vehicles, a connector pin inside the engine wiring harness may have damaged by a testing tool during vehicle assembly. This could cause a loss of power to the ignition coils, resulting in intermittent spark firing or engine stalling. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the damaged connector pin within the ignition wiring harness coupler. In addition, the central coupler (bus bar) that the ignition wiring harness attaches to will be replaced, in case it has incurred damage by the connector pin.

Similar Vehicles

Select Another Vehicle
Search now