2003 Honda Civic

Canadian MSRP
$16,000 - $28,500
2003 Honda Civic

Key Specifications for 2003 Honda Civic

Fuel Economy 4.6 - 8.2 City/HWY combined
Horsepower 115 - 127 hp
Drivetrain Front-Wheel Drive
Engine Gasoline, Hybrid
Torque 110 - 114 ft-lb
Seats 5

Review & Compare:
2003 Honda Civic Trims

The 2003 Honda Civic has 17 trims. Below you will be able to review all the trims with the option to compare.
17 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-323
Recall date
2019-06-28
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005 2007
Manufacturer Recall Number:
Units Affected:
222,662
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-117
Recall date
2019-03-07
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005
Manufacturer Recall Number:
Units Affected:
83,977
Notification Type:
Safety Mfr
Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
Recall number
2015-261
Recall date
2015-06-15
System affected
Airbag
Model year(s) affected
2001 2003 2004 2005
Manufacturer Recall Number:
H-3-15
Units Affected:
235,711
Notification Type:
Safety Mfr
On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2015-225
Recall date
2015-05-27
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2014-567
Recall date
2014-12-15
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Superseded
Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: Click here for more information
Recall number
2014-242
Recall date
2014-06-20
System affected
Airbag
Model year(s) affected
2002 2003
Manufacturer Recall Number:
H-2-14
Units Affected:
168,968
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013111. Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2013-111
Recall date
2013-04-10
System affected
Airbag
Model year(s) affected
2001 2002 2003
Manufacturer Recall Number:
H-2-13
Units Affected:
107,786
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2010-264
Recall date
2010-08-09
System affected
Powertrain
Model year(s) affected
2003
Manufacturer Recall Number:
HL00, HL01, HL02, AK33
Units Affected:
58,292
Notification Type:
Safety TC
On certain vehicles the interlock lever of the ignition switch may wear prematurely, which can allow the interlock function to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the PARK position before rotating the ignition key to the OFF position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the PARK position can allow the vehicle to roll away, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the original interlock pin and lever within the ignition switch with updated versions.

Similar Vehicles

Select Another Vehicle
Search now