2008 Ford F-250

Canadian MSRP
$28,999 - $47,999
2008 Ford F-250

Key Specifications for 2008 Ford F-250

Fuel Economy N/A
Horsepower 300 - 362 hp
Drivetrain Rear-Wheel Drive, Four-Wheel Drive
Engine Gasoline, Diesel
Torque 365 - 650 ft-lb
Seats 2 - 6

Review & Compare:
2008 Ford F-250 Trims

The 2008 Ford F-250 has 38 trims. Below you will be able to review all the trims with the option to compare.
38 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-420
Recall date
2019-08-21
System affected
Other
Model year(s) affected
1997 1998 1999 2008 2009 2010 2011 2012 2013 2014 2015 2016
Manufacturer Recall Number:
Units Affected:
5,327
Notification Type:
Compliance Mfr
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Recall number
2015-081
Recall date
2015-02-24
System affected
Steering
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
15S08
Units Affected:
21
Notification Type:
Safety Mfr
On certain vehicles equipped with diesel engines, service replacement steering gears, installed after June 30, 2014, may not properly mount to the frame rail due to insufficient clearance. This could result in insufficient clamp load on the joints, which over time may cause fatigue of one or more of the steering gear retention bolts. If the steering gear bolts were to fatigue, one or more of the bolts could fracture, which could result in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will install spacers between the gear and the frame rail to add clearance and ensure adequate clamp load to the joints.

Similar Vehicles

Select Another Vehicle
Search now