smooth riding SUV with luxury comforts and leather seating with custom seats. on steering control buttons for cd player stereo sound system. running boards on both sides of the vehicle.
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Safety Risk:
Glass that breaks in to large pieces could create a risk of injury.
Corrective Actions:
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles, the driver’s door module could experience electrical faults resulting a loss of switch function, erratic switch behaviour (such as power windows lowering and/or raising without driver input) or an electrical short circuit, potentially resulting in a vehicle fire. These issues could occur even when the ignition key is removed and could increase the risk of injury and/or property damage. Correction: Dealers will install a new driver’s door switch module. In the interim, owners should park their vehicle outdoors. Note: This recall is an expansion of recall 2014-279.
On certain vehicles, the headlamp driver module (HDM) may not operate properly in high underhood temperatures. If the HDM is not operating correctly, the low-beam headlamps and daytime running lamps could fail to illuminate. Loss of daytime running lamps and low-beam headlamps could result in decreased driver's vision, as well as rendering the vehicle less visible to other motorists, which could result in a crash causing injury and/or property damage. Correction: Dealers will replace the headlamp relay (HDM) located in the underhood bussed electrical centre (UBEC). Note: this condition does not affect the high-beam headlamps, marker lamps, turn signals, or fog lamps. Note: This recall supersedes recall 2014-535.
On certain vehicles, the headlamp driver module (HDM) may not operate properly in high underhood temperatures. If the HDM is not operating correctly, the low-beam headlamps and daytime running lamps could fail to illuminate. Loss of daytime running lamps and low-beam headlamps could result in decreased driver's vision, as well as rendering the vehicle less visible to other motorists, which could result in a crash causing injury and/or property damage. Correction: Dealers will replace the headlamp driver module (HDM) with a new design HDM. Note: this condition does not affect the high-beam headlamps, marker lamps, turn signals, or fog lamps. Note: This recall is superseded by recall 2015365.
On certain vehicles, the driver’s door module could experience electrical faults resulting a loss of switch function, erratic switch behaviour (such as power windows lowering and/or raising without driver input) or an electrical short circuit, potentially resulting in a vehicle fire. These issues could occur even when the ignition key is removed and could increase the risk of injury and/or property damage. Correction: Dealers will inspect the driver’s door module part number and replace if necessary. In the interim, owners should park their vehicle outdoors. Note: This recall supersedes recalls 2012-282 and 2013-210. Vehicles that were inspected and/or repaired under the previous recalls will require re-inspection and/or repair.
On certain vehicles, the driver’s door module could short circuit and fail. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will test the driver’s window and door lock switches for proper operation. If the switches function correctly, a protective coating will be applied to the door module. If the switches do not function properly, the door module will be replaced. Note: This recall affects vehicles not covered by 2012-282 due to their geographic location.
On certain vehicles originally sold in or currently operated in areas of heavy road salt usage during winter months (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), the driver’s door module could short circuit and fail. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will test the driver’s window and door lock switches for proper operation. If the switches function correctly, a protective coating will be applied to the door module. If the switches do not function properly, the door module will be replaced.
Certain vehicles may have been built with a power steering hose that is not to specification. Under extreme steering manoeuvres, such as turning the steering wheel fully to the left or right while braking, the hose may fracture and leak fluid. If this were to occur, power steering assist would be lost and increased steering effort would be required. On vehicles equipped with hydro-boost power brakes, it could also result in loss of power brake assist and increase braking effort would be required. If power steering fluid were to spray onto hot engine parts, an engine compartment fire could occur. Correction: Dealers will inspect the power steering hose(s) for two suspect date codes and replace them if required.
On certain vehicles, the directional/hazard signals may not operate as designed. Actuation of the turn signal or hazard lights will cause them to illuminate and remain illuminated (not flash as intended). Drivers may not be able to clearly signal their intentions to turn, change travel lanes or potentially warn others of an impaired vehicle operating condition. Correction: Dealers will replace the turn signal/hazard flasher module.
Certain vehicles do not comply with the requirements of CMVSS 212 - Windshield Mounting. The windshield urethane bead may not have adhered to the body in certain areas during the cure process. As a result, the windshield may not be retained during a vehicle crash. Correction: Dealers will replace the windshield.
On certain vehicles, vibration and heat may cause the tail lamp/stop lamp bulb to loosen in its socket. If this occurs, the bulb may flicker and eventually become inoperative. The loss of one or both of the tail lamps/stop lamps could reduce the vehicle's visibility to following drivers and fail to warn others that the vehicle is braking and/or is stopped, which could lead to a vehicle crash. Correction: Dealers will inspect the tail lamp/stop lamp assemblies and, if necessary, replace them.
On certain vehicles, the brake hoses are not labelled with a designation that identifies the manufacturer of the assembly as required by CMVSS 106. This non-compliance has no effect on the performance of the involved brake hose assemblies. Correction: Since this does not pose a safety risk, no corrective action is required.
Subscribe for the latest car reviews, listings, products and more right in your inbox.
By clicking 'Subscribe', I agree to receive communications from AutoTrader. I can unsubscribe at anytime. I also agree to the Terms of Use and Privacy Policy.