Review: 2008 BMW X6 Trim
The 2008 BMW X6 has 1 trim. Below you will be able to review this trim in detail.
Filter by category
1 trim available
Back to login
2008 BMW X6
Canadian MSRP
$63,900
Key Specifications for 2008 BMW X6
Fuel Economy
N/A
Horsepower
300 hp
Drivetrain
All-Wheel Drive
Engine
Gasoline
Torque
300 ft-lb
Seats
4
Buyer’s Guide
NEW FOR 2008:
All-new model
An all-new model in the BMW line-up, the X6 is BMW's newest SUV, and is a derivative of the popular X5 model. BMW calls it a "Sports Activity Coupe", although it definitely has four doors.
The X6 is available with two engines, both with twin turbochargers. The X6 xDrive 35i uses a 3.0-litre inline six-cylinder, while the xDrive 50i uses a 4.4-litre V8 engine. Both use a six-speed automatic transmission with manual shift mode and wheel-mounted shifter paddles.
Both models feature the company's xDrive proactive all-wheel drive system, and BMW's first use of its new Dynamic Performance Control, which works in conjunction with the xDrive system to feed power when needed and stabilize the vehicle under all degrees of throttle.
Features on the xDrive 35i include 19-inch wheels with run-flat tires, dual-zone automatic climate control, sport-tuned suspension, start/stop button, automatic adaptive Xenon headlights, adaptive brake lights, fog lights, cornering lights, tire pressure warning system, rain-sensing wipers with heated washer jets, heated mirrors, alarm system with interior motion sensor, cruise control, power sunroof, multi-function three-spoke heated leather sport steering wheel with power tilt and telescopic function, cargo cover, 60/40 split-folding rear seat, ten-way power adjustable heated front seats in Nevada leather, CD/MP3 stereo with auxiliary input jack, iDrive with 6.5-inch control display, and Bluetooth hands-free communication system.
The xDrive 50i will be released at a later date.
Select 1 more trim
Are you sure you want to cancel your trim comparison?
eee
Engine
Fuel System
Torque Blurb!
Photos
No content available
AutoTrader Review
N/A
This vehicle has not yet been reviewed
Reviews and News
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-018
Recall date
2019-01-15
System affected
Airbag
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014
Manufacturer Recall Number:
Units Affected:
20,532
Notification Type:
Safety Mfr
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2018-195
Recall date
2018-04-19
System affected
Electrical
Model year(s) affected
2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,739
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied. Additional note: This is an expansion of recalls 2011-376 and 2012-008.
Recall number
2017-016
Recall date
2017-01-10
System affected
Airbag
Model year(s) affected
2008
Manufacturer Recall Number:
Units Affected:
7,671
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag module or inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016-505
Recall date
2016-10-13
System affected
Fuel Supply
Model year(s) affected
2008 2009 2010 2011
Manufacturer Recall Number:
Units Affected:
16,663
Notification Type:
Safety Mfr
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potentially cause the fuel pump to stop working causing the vehicle to stall without warning, increasing the risk of a crash causing injury and/or damage to property. Also, in a very rare case, a fuel leak combined with an external ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery module.
Recall number
2016-142
Recall date
2016-03-31
System affected
Airbag
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014
Manufacturer Recall Number:
Units Affected:
104,151
Notification Type:
Recalls Audit
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
Recall number
2012-129
Recall date
2012-04-12
System affected
Label
Model year(s) affected
2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
67,771
Notification Type:
Inconsequential
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Recall number
2011-376
Recall date
2011-10-21
System affected
Electrical
Model year(s) affected
2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,143
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
Similar Vehicles
Select Another Vehicle