Back to login
BMW X5
Model Overview
BMW's oldest SUV model was all-new in 2019's fourth-generation version of this mid-sizer. Long gone is the ungainly look of early X5s, as BMW's stylists have finally figured out how to effectively blend an SUV shape with the brand's most recognizable visual elements. The X5 also is also about as good as it gets for mid-range utility performance. Going, stopping and turning all happen with responsiveness formerly reserved for sports cars.
Photos
Reviews and News
Owner Scores
Comfort
N/A
Performance
N/A
Fuel Economy
N/A
Interior Design
N/A
Exterior Styling
N/A
Reliability
N/A
Owner Reviews
Google
OMG what a piece of crap
February 19, 2019
Overall Score
you remember the 80's.. when there were cars like the ford escort that broke just looking at it? well.'
this bmw is the same..
OMG.. what a lemon i put my hands on..
electronics, brakes.. sensors.. won't start.. doors unlock anytime..
it even stopped in the middle of the 416 going to toronto..
i bought it at a dealership. thinking i was covered..but nooo..
all the money i put in this crap..i could have bought a new one
and to add injury to insult.. i went to mercedes to get rid of it and it got only $6000 for it..
avoid BMW>. they are becoming DODGE...
Comfort
8
Performance
8
Fuel Economy
4
Interior Design
8
Exterior Styling
8
Reliability
2
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2024-544
Recall date
2024-08-15
System affected
Label
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Manufacturer Recall Number:
Units Affected:
587,250
Notification Type:
Inconsequential
Issue:
On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French.
Safety Risk:
This error does not affect vehicle safety.
Corrective Actions:
This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
Recall number
2024-468
Recall date
2024-08-13
System affected
Engine
Model year(s) affected
2016 2017 2018
Manufacturer Recall Number:
11 83 24RC
Units Affected:
78,381
Notification Type:
Safety Mfr
Issue:
On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit.
Safety Risk:
A short circuit can create the risk of a fire, even while the vehicle is parked and turned off.
Corrective Actions:
To reduce the safety risk, BMW advises you to park your vehicle outdoors and away from other vehicles or structures until the recall repairs are completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the water pump and electrical connector. The dealer will also install a shield on the connector.
Recall number
2024-456
Recall date
2024-08-12
System affected
Brakes
Model year(s) affected
2024 2025
Manufacturer Recall Number:
34 82 24RC,M34 81 24RC, A 08 2024 06
Units Affected:
24,870
Notification Type:
Safety Mfr
Issue:
On certain vehicles, a problem with the integrated brake system could cause reduced power brake assist. As a result, there may be reduced braking and the antilock braking system (ABS) and dynamic stability control (DSC) may not work.
Note: This recall replaces Transport Canada recall no. 2024-087.
Safety Risk:
Reduced braking can cause extended stopping distances and could increase the risk of a crash. Additionally, antilock brake and stability control systems that don't work could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the integrated brake system.
Recall number
2024-444
Recall date
2024-08-01
System affected
Electrical
Model year(s) affected
2019 2020
Manufacturer Recall Number:
12 83 24RC
Units Affected:
11,802
Notification Type:
Safety Mfr
Issue:
On certain vehicles, if you try to start the engine repeatedly, the starter could overheat. If this happens, and nearby components contact the starter, it could cause a fire.
Safety Risk:
A fire can create the risk of injury.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to update the vehicle software.
Recall number
2024-402
Recall date
2024-07-11
System affected
Airbag
Model year(s) affected
2014
Manufacturer Recall Number:
32 84 24RC
Units Affected:
312
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the driver-front airbag inflator could rupture when the airbag deploys in a crash. If this happens, the airbag may not properly inflate and fragments could be propelled toward vehicle occupants.
Safety Risk:
An airbag inflator that ruptures can create a risk of injury or death.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the driver-front airbag module.
Recall number
2024-392
Recall date
2024-07-03
System affected
Airbag
Model year(s) affected
2016
Manufacturer Recall Number:
32 82 24RC / 32 83 24RC
Units Affected:
44,131
Notification Type:
Safety Mfr
Issue:
This recall applies to vehicles that may be equipped with a replacement sport or M-sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver-front airbag module.
To learn if your vehicle is affected by this recall, owners may:
• Visit https://www.bmw.ca/en/ssl/VehicleRecall.html
• Contact your preferred or local BMW Retailer
• Call BMW Customer Relations Recall Services at 1-855-217-3002
Recall number
2024-277
Recall date
2024-05-15
System affected
Seats And Restraints
Model year(s) affected
2025
Manufacturer Recall Number:
72 83 24RC
Units Affected:
222
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the seat belt reminder may not work when the front seat belts are not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt.
Safety Risk:
A seat belt warning that doesn't work correctly may not remind you and/or the front passenger to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the front seat belt buckle assemblies.
Recall number
2024-268
Recall date
2024-05-10
System affected
Label
Model year(s) affected
2025
Manufacturer Recall Number:
71 82 24RC
Units Affected:
8
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the information on the tire and loading information label may be incorrect. This could lead you to inflate the tires incorrectly and/or use the wrong rims and tires. This could lead to poor handling and/or a tire failure.
Safety Risk:
Poor handling or a tire failure could cause a loss of control and increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to install a corrected tire and loading information label.
Recall number
2024-087
Recall date
2024-02-12
System affected
Brakes
Model year(s) affected
2024
Manufacturer Recall Number:
34 80 24RC & A 02 2024 06
Units Affected:
7,673
Notification Type:
Safety Mfr
Issue:
On certain vehicles, a problem with the integrated brake system could cause reduced power brake assist. As a result, there may be reduced braking and the antilock braking system (ABS) and dynamic stability control (DSC) may not work.
Safety Risk:
Reduced braking can cause extended stopping distances and could increase the risk of a crash. Additionally, antilock brake and stability control systems that don't work could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the integrated brake system.
Recall number
2023-646
Recall date
2023-12-06
System affected
Powertrain
Model year(s) affected
2023
Manufacturer Recall Number:
24 82 23RC
Units Affected:
79
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the integrated transmission control unit (ITCU) may not be sealed properly. As a result, transmission oil could leak into the unit and cause the transmission gears to seize. If this happens, there could be a loss of power to the wheels.
Safety Risk:
A loss of power to the wheels could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the ITCU. The dealer will also inspect the transmission fluid and replace it, if necessary.
Recall number
2023-634
Recall date
2023-11-24
System affected
Airbag
Model year(s) affected
2014
Manufacturer Recall Number:
32 85 23RC
Units Affected:
7
Notification Type:
Safety Mfr
Issue:
On a small number of vehicles, the driver-front airbag inflator could rupture when the airbag deploys in a crash. If this happens, the airbag may not properly inflate and fragments could be propelled toward vehicle occupants.
Safety Risk:
An airbag inflator that ruptures can create a risk of injury or death.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the driver-front airbag module.
Recall number
2023-568
Recall date
2023-10-20
System affected
Engine
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
11 83 23RC
Units Affected:
21,475
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the variable camshaft timing (VANOS) adjustment unit housing bolts could loosen or break. As a result, the camshaft could become incorrectly adjusted and cause the engine to enter a reduced power mode (limp mode) or to stall while driving.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the VANOS bolts.
Recall number
2023-500
Recall date
2023-09-07
System affected
Seats And Restraints
Model year(s) affected
2024
Manufacturer Recall Number:
72 82 23RC
Units Affected:
221
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the fabric for the passenger-front knee airbag may not have been stitched properly. As a result, the passenger-front knee airbag may not inflate properly in a crash.
Safety Risk:
An airbag that doesn't inflate properly could increase the risk of injury in a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the passenger-front knee airbag. BMW recommends not to transport a person in the front-passenger seat until the recall repairs have been completed.
Recall number
2023-375
Recall date
2023-07-10
System affected
Airbag
Model year(s) affected
2024
Manufacturer Recall Number:
72 81 23RC
Units Affected:
191
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the driver and/or front passenger knee airbag(s) may not inflate properly in a crash.
Safety Risk:
An airbag that does not inflate properly could create an increased risk of injury in a crash.
Corrective Actions:
BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the driver and/or front passenger knee airbag(s). BMW recommends not to transport a front passenger until the recall repairs are completed.
Recall number
2023-208
Recall date
2023-04-06
System affected
Seats And Restraints
Model year(s) affected
2023
Manufacturer Recall Number:
52 82 23RC
Units Affected:
26
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, incorrect head restraint guide sleeves may have been installed on the second-row outboard seats. As a result, the head restraints may not lock in place and could move in a crash.
Safety Risk:
Head restraints that move in a crash could increase the risk of an injury.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealership to inspect the second-row outboard seat head restraint guide sleeves, and replace them if necessary. To minimize the safety risk, BMW recommends not to transport people in the second-row outboard seats until the recall repairs are completed.
Recall number
2022-202
Recall date
2022-04-20
System affected
Structure
Model year(s) affected
2019 2020 2021 2022
Manufacturer Recall Number:
61 81 22RC
Units Affected:
6,235
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, a software problem could allow you to close the sunroof remotely without the key fob inside the vehicle. Canadian regulations require the key fob to be in or near the vehicle when closing the sunroof.
Safety Risk:
A sunroof that can be closed without the key fob in or near the vehicle could create a risk of injury.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealership to reprogram the roof function control unit. Alternatively, you can download an over-the-air update to fix this problem.
Recall number
2022-095
Recall date
2022-03-02
System affected
Engine
Model year(s) affected
2007 2008 2009 2010
Manufacturer Recall Number:
11 80 22RC
Units Affected:
98,111
Notification Type:
Safety Mfr
Issue:
On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat.
Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair.
Safety Risk:
An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
Recall number
2021-469
Recall date
2021-07-29
System affected
Fuel Supply
Model year(s) affected
2014 2015 2016 2017 2018
Manufacturer Recall Number:
13 80 21RC
Units Affected:
3,481
Notification Type:
Safety Mfr
Issue:
On certain vehicles equipped with a diesel engine, the high-pressure fuel pump may wear prematurely. This can cause reduced engine performance and could lead to a sudden engine stall.
Note: A warning lamp on the instrument cluster will turn on if the fuel pressure drops.
Safety Risk:
A loss of engine power could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the high-pressure fuel pump.
Recall number
2021-129
Recall date
2021-03-10
System affected
Seats And Restraints
Model year(s) affected
2021
Manufacturer Recall Number:
52 81 21RC
Units Affected:
40
Notification Type:
Safety Mfr
Issue:
Certain vehicles were equipped with incorrect head restraints on the second-row seats. As a result, the head restraints may not properly lock in place. This could cause the head restraints to detach in a crash.
Safety Risk:
Head restraints that detach in a crash could increase the risk of an injury.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect and replace the head restraints on the second-row outboard seats, if necessary.
Recall number
2021-078
Recall date
2021-02-18
System affected
Visual System
Model year(s) affected
2019 2020 2021
Manufacturer Recall Number:
66 80 21RC
Units Affected:
2,263
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, a software problem could cause the rearview camera image not to appear correctly in the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.
Safety Risk:
A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to update the rearview camera software, if necessary.
Recall number
2021-061
Recall date
2021-02-10
System affected
Brakes
Model year(s) affected
2020
Manufacturer Recall Number:
34 80 21RC
Units Affected:
45
Notification Type:
Safety Mfr
Issue:
On certain vehicles, an internal part in the integrated brake system could fail during hard braking. If this happens, there would be a reduction in brake boost and the antilock brake system (ABS) would turn off. This can cause an increase in brake pedal effort that is required to stop the vehicle.
Safety Risk:
A sudden increase in brake pedal force and a loss of ABS braking could lead to an increase in stopping distance. This could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer replace the integrated brake system (hydraulic unit and master cylinder).
Recall number
2020-528
Recall date
2020-11-05
System affected
Powertrain
Model year(s) affected
2020
Manufacturer Recall Number:
31 80 20RC
Units Affected:
8
Notification Type:
Safety Mfr
Issue:
On a small number of vehicles, a weld on the front axle support bracket could break due to a manufacturing defect. As a result, the right front control arm could become loose. If this happens, there could be a sudden change in handling.
Safety Risk:
A sudden change in handling could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the front axle support.
Recall number
2020-464
Recall date
2020-09-30
System affected
Electrical
Model year(s) affected
2021
Manufacturer Recall Number:
61 87 20RC / M61 86 20RC
Units Affected:
194
Notification Type:
Safety Mfr
Issue:
On certain plug-In hybrid electric vehicles (PHEV), debris may have entered the high-voltage battery during production. As a result, the battery could short circuit.
Safety Risk:
A short circuit in the battery could create a fire risk.
Corrective Actions:
BMW will notify owners by mail. The corrective actions for this recall are under development. BMW recommends that you should not charge your vehicle and that you should not drive the vehicle in manual mode, sport mode or use the shift paddles until the recall repairs have been completed. BMW also recommends that you should drain the high-voltage battery via iDrive, by setting/leaving the charging state at 30%, until the recall repairs have been completed.
Recall number
2020-409
Recall date
2020-09-01
System affected
Lights And Instruments
Model year(s) affected
2020 2021
Manufacturer Recall Number:
51 83 20RC
Units Affected:
160
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the wrong headlight lenses may have been installed. This could cause the headlights to produce blue light. Canadian regulations do not allow headlights to emit a blue light.
Safety Risk:
Headlights that produce blue light may confuse other road users. This could increase the risk of a crash.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the headlights. They will be replaced, if necessary.
Recall number
2020-385
Recall date
2020-08-18
System affected
Powertrain
Model year(s) affected
2021
Manufacturer Recall Number:
61 82 20RC & M61 83 20RC
Units Affected:
84
Notification Type:
Safety Mfr
Issue:
On certain Plug-In Hybrid Electric Vehicles (PHEV), weld beads may not have been removed from the high voltage battery during assembly. As a result, during the initial charge to at least 80% of capacity, the weld beads could cause a short circuit between the battery cells.
Safety Risk:
A short circuit could create the risk of a fire.
Corrective Actions:
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the high voltage battery. The battery modules will be replaced, if necessary.
Note: Only one of the affected vehicles was sold to a retail customer. Dealers will inspect and repair all other vehicles before they are sold.
Recall number
2020-380
Recall date
2020-08-14
System affected
Tires
Model year(s) affected
2021
Manufacturer Recall Number:
36 80 20RC
Units Affected:
6
Notification Type:
Safety Mfr
Issue:
A small number of vehicles were built with tires that may have a defect in the inner layer of the tire. This could lead to sudden loss of air pressure or a tire failure.
Note: This recall only affects vehicles equipped with Pirelli P-Zero 275/35R22 or Pirelli P-Zero 315/30R22 tires, with date codes of either 2820 or 2920.
Safety Risk:
A tire failure could cause a loss of control and increase the risk of a crash.
Corrective Actions:
None of the affected vehicles have been sold to retail customers. BMW will instruct dealers to inspect the tires and each affected vehicle. The tires will be replaced, if necessary.
Recall number
2020-366
Recall date
2020-08-07
System affected
Powertrain
Model year(s) affected
2020 2021
Manufacturer Recall Number:
12 85 20RC
Units Affected:
7
Notification Type:
Safety Mfr
Issue:
On a small number of vehicles, an extra bolt may have been installed in the starter motor. The bolt was not properly attached and could fall into the transmission housing. If this happens, you may hear an unusual noise from the transmission and the engine could stall suddenly.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
None of the affected vehicles have been sold to retail customers. BMW will instruct dealers to inspect the vehicles. If an additional bolt is found, it will be removed. BMW will replace any parts that are damaged by this problem before the vehicles are sold.
Recall number
2020-342
Recall date
2020-07-28
System affected
Steering
Model year(s) affected
2019
Manufacturer Recall Number:
32 84 20RC
Units Affected:
1
Notification Type:
Safety Mfr
Issue:
On one X5 xDrive40i model, a bearing plate for the steering column shaft may not have been properly attached to the vehicle. As a result, the plate could loosen and cause a change in steering control.
Safety Risk:
A loose steering column could affect steering control and increase the risk of a crash.
Corrective Actions:
BMW will notify the owner by mail and instruct them to take the vehicle to a dealer to inspect the steering column shaft bearing plate. It will be repaired or replaced, as necessary.
Recall number
2020-010
Recall date
2020-01-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012
Manufacturer Recall Number:
72 81 20RC
Units Affected:
11
Notification Type:
Safety Mfr
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2020-008
Recall date
2020-01-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
32 80 20RC / 32 81 20RC
Units Affected:
47
Notification Type:
Safety Mfr
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-480
Recall date
2019-10-01
System affected
Visual System
Model year(s) affected
2019 2020
Manufacturer Recall Number:
66 82 19RC
Units Affected:
14,323
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on.
Safety Risk:
Reduced rear visibility could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed.
Recall number
2019-358
Recall date
2019-07-24
System affected
Wheels
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
2
Notification Type:
Safety Mfr
Issue:
The wheel bolts on the left side of certain vehicles may not be properly tightened. This could cause the bolts to loosen or fall off, and could result in a wheel separating from the vehicle.
Safety Risk:
A wheel separation could increase the risk of a crash. A wheel that separates could also hit another person or vehicle.
Corrective Actions:
BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the left side wheel bolts and ensure they are properly tightened. Owners are advised to not drive their vehicle until the recall repairs are completed.
Recall number
2019-335
Recall date
2019-07-04
System affected
Fuel Supply
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
8
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the high-pressure fuel pumps (HPFP) may have been attached to the cylinder head incorrectly. Over time, this could cause the flange of the HPFP to crack. This could result in a fuel leak in the engine compartment.
Safety Risk:
A fuel leak in the engine compartment could increase the risk of a fire.
Corrective Actions:
BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the high-pressure fuel pumps.
Recall number
2019-249
Recall date
2019-05-24
System affected
Label
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
1
Notification Type:
Compliance Mfr
Issue:
One BMW X5 was produced without a vehicle identification number (VIN) label under the windshield. Canadian regulations require the VIN to be clearly visible from outside the vehicle.
Safety Risk:
This labelling error is unlikely to affect safety.
Corrective Actions:
BMW will notify the owner by mail and instruct him to take his vehicle to a dealer to install a VIN label.
Recall number
2019-070
Recall date
2019-02-14
System affected
Seats And Restraints
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
11
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the bolts for the driver's seat and/or seat belt may not be properly tightened. This could cause the seat or seat belt come loose or detach in a crash. Drivers may notice a rattling noise in the area near the bottom of the seat if the bolts are loose.
Safety Risk:
A driver that is not properly restrained could be injured in a crash.
Corrective Actions:
The company will notify owners by mail. Owners will be instructed to take their vehicle to a BMW dealer to have the bolts for the driver's seat and seat belt inspected and tightened, as required.
Recall number
2019-020
Recall date
2019-01-15
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004
Manufacturer Recall Number:
Units Affected:
10,135
Notification Type:
Safety Mfr
Issue:
Some vehicles may contain a replacement sport steering wheel with a Takata driver-front air bag module. Certain conditions, including long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have an inspection performed. If a Takata airbag inflator is found, then the driver-front airbag module will be replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-018
Recall date
2019-01-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
20,532
Notification Type:
Safety Mfr
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2018-721
Recall date
2018-12-20
System affected
Label
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
1
Notification Type:
Compliance Mfr
The affected vehicle may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. The airbag warning label on the driver and/or passenger side sun visors may be incorrect or missing. A missing or incorrect sun visor air bag warning label would not provide the required air bag warning information to the driver and/or passenger, which could increase the risk of injury. Correction: A dealer will inspect the vehicle and install a new driver and/or passenger sun visor with the correct label as necessary.
Recall number
2018-568
Recall date
2018-10-18
System affected
Electrical
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
120
Notification Type:
Safety Mfr
On certain vehicles, the Body Domain Controller (BDC) may have been manufactured with defective electrical parts. This could result in a short circuit, causing the BDC to overheat, which could cause smoke and lead to a fire causing injury and/or damage to property. Correction: Dealers will replace the BDC.
Recall number
2018-275
Recall date
2018-05-23
System affected
Steering
Model year(s) affected
2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
7,179
Notification Type:
Safety Mfr
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. This may cause the belt to detach, resulting in a sudden loss of power steering assist. A vehicle experiencing a loss of power steering assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt. Note: This recall supersedes and expands upon recall 2012-396.
Recall number
2018-195
Recall date
2018-04-19
System affected
Electrical
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,739
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied. Additional note: This is an expansion of recalls 2011-376 and 2012-008.
Recall number
2018-018
Recall date
2018-01-09
System affected
Airbag
Model year(s) affected
2009
Manufacturer Recall Number:
Units Affected:
4,035
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2017-470
Recall date
2017-09-28
System affected
Engine
Model year(s) affected
2007 2008 2009 2010
Manufacturer Recall Number:
Units Affected:
79,616
Notification Type:
Safety TC
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could increase the risk of injury and/or damage to property. Correction: Dealers will replace the PCV valve heater.
Recall number
2017-113
Recall date
2017-03-03
System affected
Powertrain
Model year(s) affected
2011 2012 2013
Manufacturer Recall Number:
Units Affected:
12,100
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft. Note: This is an expansion of recall 2016-226.
Recall number
2017-034
Recall date
2017-01-20
System affected
Airbag
Model year(s) affected
2001 2002 2003
Manufacturer Recall Number:
Units Affected:
15,415
Notification Type:
Safety Mfr
On certain vehicles that had the driver's side frontal airbag replaced in the past, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver's side frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will inspect the driver's side frontal airbag module, and will replace it, if necessary. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2017-016
Recall date
2017-01-10
System affected
Airbag
Model year(s) affected
2007 2008
Manufacturer Recall Number:
Units Affected:
7,671
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag module or inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016-505
Recall date
2016-10-13
System affected
Fuel Supply
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
Units Affected:
16,663
Notification Type:
Safety Mfr
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potentially cause the fuel pump to stop working causing the vehicle to stall without warning, increasing the risk of a crash causing injury and/or damage to property. Also, in a very rare case, a fuel leak combined with an external ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery module.
Recall number
2016-226
Recall date
2016-05-13
System affected
Powertrain
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
3,331
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft.
Recall number
2016-142
Recall date
2016-03-31
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
104,151
Notification Type:
Recalls Audit
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
Recall number
2015-230
Recall date
2015-05-27
System affected
Airbag
Model year(s) affected
2003
Manufacturer Recall Number:
Units Affected:
30,668
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014-587. Correction: Dealers will replace the airbag module.
Recall number
2014-170
Recall date
2014-05-13
System affected
Engine
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
21,811
Notification Type:
Safety Mfr
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. In rare instances the engine could stall, increasing the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace housing bolts that break and perform associated repairs for 10 years/unlimited mileage from the vehicle's in-service date. Note: This applies only to vehicles not covered by recall 2014-127.
Recall number
2014-127
Recall date
2014-04-10
System affected
Engine
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
20,022
Notification Type:
Safety Mfr
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace affected bolts.
Recall number
2013-266
Recall date
2013-08-02
System affected
Fuel Supply
Model year(s) affected
2009 2010
Manufacturer Recall Number:
Units Affected:
541
Notification Type:
Safety Mfr
On certain vehicles equipped with a diesel engine, the fuel filter heater (used for warming diesel fuel during vehicle operation at low ambient air temperature) could malfunction. This could allow permanent activation of the fuel filter heater, including activation on a parked vehicle with the ignition in the OFF position, which could drain the battery. A discharged battery would prevent engine start-up. In certain cases the heater unit could overheat, which could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filter heater assembly. Note: This is an expansion of recall 2011-310.
Recall number
2013-238
Recall date
2013-07-05
System affected
Airbag
Model year(s) affected
2006
Manufacturer Recall Number:
Units Affected:
15,294
Notification Type:
Safety TC
On certain vehicles, the front passenger seat occupant detection mat can fatigue over time. As a result, the passenger airbag could deactivate, illuminating the airbag warning lamp and the passenger airbag ON/OFF lamp. Failure of the passenger airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Vehicles will receive special extended warranty coverage of 10 years from first registration. Under this special coverage program, vehicles which experience this condition will have the occupant detection mat replaced.
Recall number
2013-047
Recall date
2013-02-07
System affected
Brakes
Model year(s) affected
2007 2008 2009 2010
Manufacturer Recall Number:
Units Affected:
3,912
Notification Type:
Safety Mfr
On certain vehicles, a check valve in the brake vacuum pump may leak a small amount of lubricating oil. Over time, this could result in contamination of the brake booster. Loss of brake power assist could occur which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the brake booster and master cylinder. Additionally, the brake vacuum line (including the check valve) will be replaced to eliminate the possibility of oil reaching the brake booster.
Recall number
2012-396
Recall date
2012-11-26
System affected
Steering
Model year(s) affected
2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
5,542
Notification Type:
Safety TC
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. As such, the belt may become detached, resulting in a sudden loss of steering power assist. A vehicle experiencing a loss of steering power assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt and tighten with a revised torque procedure. A thread locking compound will be applied to the replacement bolt.
Recall number
2012-178
Recall date
2012-06-12
System affected
Steering
Model year(s) affected
2012 2013
Manufacturer Recall Number:
Units Affected:
184
Notification Type:
Safety Mfr
On certain vehicles, the steering gear was manufactured incorrectly and, as a result, a steering fluid leak could develop. Loss of power steering fluid could cause a loss of steering power assist, which may result in a crash. Also, power steering fluid leakage may contact a hot engine or exhaust component, which could cause a fire. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the steering gear assembly.
Recall number
2012-129
Recall date
2012-04-12
System affected
Label
Model year(s) affected
2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
67,771
Notification Type:
Inconsequential
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Recall number
2011-376
Recall date
2011-10-21
System affected
Electrical
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,143
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
Recall number
2011-310
Recall date
2011-08-19
System affected
Fuel Supply
Model year(s) affected
2009
Manufacturer Recall Number:
Units Affected:
590
Notification Type:
Safety Mfr
On certain vehicles equipped with a diesel engine, the fuel filter heater (used for warming diesel fuel during vehicle operation at low ambient air temperature) could malfunction. This could allow permanent activation of the fuel filter heater, including activation on a parked vehicle with the ignition in the OFF position, which could drain the battery. A discharged battery would prevent engine start-up. In certain cases the heater unit could overheat, which could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filter heater assembly.
Recall number
2011-237
Recall date
2011-06-23
System affected
Engine
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
238
Notification Type:
Safety Mfr
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt tensioner may have been manufactured incorrectly and could fail. This could cause a loss of steering power assist, which may result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the belt tensioner.
Recall number
2010-369
Recall date
2010-10-27
System affected
Fuel Supply
Model year(s) affected
2008
Manufacturer Recall Number:
Units Affected:
1,723
Notification Type:
Safety Mfr
On certain vehicles, due to a manufacturing process fault, the fuel pump was not produced to specifications. As a result, under specific vehicle operating conditions, the fuel pump's commutator could experience an increase in wear which could lead to a malfunction of the fuel pump. Ultimately, vehicle stalling could occur, which in conjunction with traffic, road conditions, and driver's reactions, increases the risk of a vehicle crash causing property damage, or personal injury. Correction: Dealers will replace the fuel pump.
Recall number
2010-177
Recall date
2010-06-01
System affected
Label
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
13
Notification Type:
Compliance Mfr
Certain vehicles equipped with 20 inch wheels & tires may have incorect information listed on the tire information label. The label may erroniously state that the vehicle is equipped with 19 inch wheels & tires. Correction: BMW will provide new labels to owners.
Recall number
2010-114
Recall date
2010-04-13
System affected
Lights And Instruments
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
172
Notification Type:
Compliance Mfr
On certain X5 M vehicles, the front side marker lamps are not illuminated as required by the Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. These vehicles were equipped with front side marker lamps, but not with the power supply cables leading to the lamps. As a result, the front side marker lamps do not illuminate. Reduced visibility increases the risk of crash causing property damage, personal injury or death. Correction: Dealers will install power supply cables for the front side marker lamps.
Recall number
2010-017
Recall date
2010-01-26
System affected
Visual System
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
6
Notification Type:
Safety Mfr
On certain vehicles, windshield bonding may be insufficient and, in case of a vehicle rollover, this could adversely affect the rigidity of the vehicle bodyshell structure, which could result in personal injury or death. Correction: Dealers will remove and refit the windshield.
Recall number
2008-307
Recall date
2008-08-26
System affected
Seats And Restraints
Model year(s) affected
2006
Manufacturer Recall Number:
Units Affected:
8,090
Notification Type:
Safety Mfr
On certain vehicles, the front passenger seat occupant detection mat can fatigue during field usage depending on the seat configuration, vehicle geometry, manner and frequency of front passenger entry/exit. Over time micro cracks could develop in the side flanks of the mat, which could lead to a break of the conductive path and the system will recognize a failure and with exception of head protection system the front passenger air bag will be deactivated. The airbag On/Off lamp will be illuminated to make the occupants aware of the deactivation. Correction: The occupant detection mat will be granted a warranty extension of 10 years.
Recall number
2007-334
Recall date
2007-10-16
System affected
Electrical
Model year(s) affected
2007
Manufacturer Recall Number:
Units Affected:
2,148
Notification Type:
Safety Mfr
Certain 550I, 650I cabriolet, 650I coupe, and X5 vehicles equipped with a V8 engine, operated in conditions of below-freezing temperatures combined with low humidity, may suffer an electrostatic discharge at the fuel rails. If this were to occur, the engine's Electronic Control Unit (ECU) could be affected such that engine stalling could result. If the engine were to stall, this would result in a loss of power steering. Loss of power steering could lead to a condition in which vehicle handling and control were impaired. Correction: Dealers will install two additional ground cable between the fuel rails and the ground connection of the ignition coils.
Recall number
2007-277
Recall date
2007-08-28
System affected
Brakes
Model year(s) affected
2007
Manufacturer Recall Number:
Units Affected:
1,009
Notification Type:
Safety Mfr
On certain vehicles, a float switch, which is attached to the brake fluid reservoir cap, could fail at high temperatures (>70 degrees Celsius) and not trigger a low fluid level warning lamp as required by CMVSS 135. Due to tolerances within the switch's magnetic parts, in conjunction with thermal expansion of the switch's plastic parts at these temperatures, the switch may malfunction. Correction: Dealers will replace the brake fluid reservoir cap.
Recall number
2005-237
Recall date
2005-08-16
System affected
Brakes
Model year(s) affected
2005
Manufacturer Recall Number:
Units Affected:
30
Notification Type:
Safety Mfr
On certain vehicles, the brake line support bracket within the front left wheel well may not have been spot welded according to specification and could loosen. If this happened, the front left brake hose could rub/chafe against the wheel well. Over time, the hose could become damaged to the point where a loss of brake fluid could occur. Correction: Dealers will secure the bracket using rivets.
Recall number
2004-291
Recall date
2004-08-12
System affected
Other
Model year(s) affected
2004
Manufacturer Recall Number:
Units Affected:
9
Notification Type:
Safety Mfr
The potential defect involves the electronic programming of the digital engine management control unit with regard to throttle valve control. On certain vehicles, when moving slowly in first gear, with low but constant throttle (approximately 1,500 - 2,000 rpm), and the clutch pedal partially depressed (approximately 1 - 2 inches) and held at this position, engine speed may increase resulting in undesired vehicle acceleration. Correction: Dealers will reprogram the digital engine management control unit.
Recall number
2004-279
Recall date
2004-08-05
System affected
Fuel Supply
Model year(s) affected
2004
Manufacturer Recall Number:
Units Affected:
29
Notification Type:
Safety Mfr
On certain vehicles, the in-tank fuel line of the suction jet fuel pump, through which fuel is transferred from the left chamber to the right chamber of the fuel tank, may have been attached incorrectly. Consequently, during vehicle operation, the in-tank fuel line could loosen. If this happened, transfer of fuel from the left chamber to the right chamber could stop. As a result, if fuel in the right chamber of the tank had been completely consumed, engine stalling would occur. Correction: Dealers will inspect the in-tank suction jet pump fuel line and, if necessary, reattach according to specifications.
Recall number
2004-246
Recall date
2004-07-15
System affected
Other
Model year(s) affected
2004
Manufacturer Recall Number:
Units Affected:
355
Notification Type:
Safety Mfr
On certain vehicles, the digital engine management control unit was not produced according to specifications. As a result, engine stalling will occur after a short period of operation. The vehicle may not be able to be restarted. Also, a loss of power steering and, after repeated actuation of the brake pedal, a loss of brake power assistance will occur. If stalling were to occur, the driver would be unable to maintain vehicle speed or accelerate. Steering and braking, while possible, would be difficult. Depending on traffic conditions and the driver's reactions, this could lead to a crash. Correction: Dealers will replace the digital engine management control unit.
Recall number
2003-265
Recall date
2003-11-04
System affected
Powertrain
Model year(s) affected
2004
Manufacturer Recall Number:
Units Affected:
40
Notification Type:
Safety Mfr
On certain vehicles, insufficient tightening torque may have been applied to certain front drivetrain fasteners. Specifically, the affected fasteners are those involving the front differential, the right output shaft housing flange at the engine, and the right-hand engine support. Insufficient torque could lead to a loosening of a fastener. If this happens, at first, noise would be perceptible to the driver. During prolonged driving, sufficient loosening of a fastener could cause damage to a fastener's threading, as well as, to engine and transmission housings. In extreme cases, the right output shaft could become disconnected. Correction: Dealer will inspect and retighten the drivetrain fasteners to their specified values.
Recall number
2003-131
Recall date
2003-05-16
System affected
Brakes
Model year(s) affected
2003
Manufacturer Recall Number:
Units Affected:
21
Notification Type:
Safety Mfr
On certain vehicles, the gap between the brake line and the cardan joint of the steering shaft is too small. The brake line may come into contact with the joint and eventually suffer damage and corrosion. Ultimately, a loss of brake fluid accompanied by a reduction in front brake performance may occur. Correction: Dealer will evaluate the distance between the brake line and the cardan joint of the steering shaft. If this distance is not sufficient, it will be increased.
Recall number
2003-025
Recall date
2003-02-05
System affected
Seats And Restraints
Model year(s) affected
2002
Manufacturer Recall Number:
RC2003-025
Units Affected:
87
Notification Type:
Safety Mfr
On certain vehicles, the cramping connection of the front safety belt buckle to the steel rope of the tensioner could detach in severe frontal crashes and could cause serious injuries to the driver and/or front passenger. Correction: Dealer will inspect both front safety belt tensioner and buckle assemblies, and replace any affected parts.
Recall number
2003-001
Recall date
2003-01-08
System affected
Brakes
Model year(s) affected
2000 2001 2002
Manufacturer Recall Number:
RC2003-001
Units Affected:
6,156
Notification Type:
Safety Mfr
On certain vehicles, the grommet holding the brake line to the front struts may slip out of its bracket. Consequently, the brake hose attached to the brake line may come in contact with the tire and be subject to wear and abrasion. This could cause some brake fluid leakage which would eventually illuminate the brake warning indicator light. If a loss of front brake performance occurs, the rear brake circuit will still be functional, and will be able to slow and stop the vehicle. Correction: Dealer will install an additional retaining clip in order to further secure the line and grommet to the strut.
Recall number
2002-138
Recall date
2002-07-22
System affected
Brakes
Model year(s) affected
2000 2001
Manufacturer Recall Number:
RC2002-138
Units Affected:
2,638
Notification Type:
Safety Mfr
On certain passenger vehicles the brake pedal arm pivot shaft could loosen from its support bracket. Eventually, the brake pedal arm could detach from the bracket, rendering the braking system ineffective, increasing the risk of a crash. Correction: Dealers will check the brake pedal arm pivot shaft for proper seating in its support bracket. In addition, a pin will be installed to secure the shaft to the bracket.
Recall number
2001-182
Recall date
2001-07-09
System affected
Engine
Model year(s) affected
2001
Manufacturer Recall Number:
RC2001-182
Units Affected:
4,812
Notification Type:
Safety Mfr
Certain passenger vehicles. The engine auxiliary/cooling fan operation, including variable speed, is electronically controlled. Failure of the fan motor can cause the electrical circuitry of the fan control unit to overload and fail, causing the fan to stop operating. If this were to occur, engine overheating and subsequent engine damage could result. In addition, it is possible for the failure of the electrical circuitry to cause a fire in the fan control unit located in the front of the engine compartment. Correction: Dealers will replace the fan.
Recall number
2001-039
Recall date
2001-02-21
System affected
Steering
Model year(s) affected
2001
Manufacturer Recall Number:
RC2001-039
Units Affected:
870
Notification Type:
Safety Mfr
On certain vehicles, the lower end of the upper steering spindle may not have been inserted completely into the aluminum u-joint assembly (coupling). In such a case, the fastening bolt used to secure the connection may not completely engage the spindle within the coupling. This would make it possible for the spindle to disconnect from the coupling, resulting in loss of steering capability and a possible crash. Correction: Spindle will be inspected for proper insertion into the coupling. If necessary, the spindle will be fully inserted and the fastening bolt replaced.
Recall number
2000-279
Recall date
2000-11-28
System affected
Seats And Restraints
Model year(s) affected
2001
Manufacturer Recall Number:
RC2000-279
Units Affected:
62
Notification Type:
Safety Mfr
On certain vehicles, the safety belt lower outboard anchorage bolt on the driver's and front passenger's seats may not have been secured properly. In the event of a crash, the safety belt system might not be able to provide its maximum restraint function. Correction: Dealers will inspect the bolts and correct the torque if necessary.
Recall number
2000-277
Recall date
2000-11-28
System affected
Steering
Model year(s) affected
2001
Manufacturer Recall Number:
Units Affected:
83
Notification Type:
Safety Mfr
On certain vehicles, the nut that secures the axial joint of the left steering tie rod to the steering gear box may not have been tightened securely. This could lead to loosening of the nut and, initially to steering wheel play and/or misalignment, as well as noise from the steering linkage. If vehicle operation continues, the tie rod could disconnect from the steering gear box. If this were to occur, loss of steering control could result. Correction: Dealers will inspect and re-torque the nut securing the axial joint of the left steering tie rod. If the torque of the nut is found to be loose, the right nut will also be checked and
corrected if necessary, and a front wheel alignment will be performed.
Recall number
2000-064
Recall date
2000-03-09
System affected
Steering
Model year(s) affected
2000
Manufacturer Recall Number:
32 50 99RC
Units Affected:
25
Notification Type:
Safety Mfr
On certain vehicles, the plastic collar which fits over the lower steering rack input shaft may not have been pushed down fully onto the rack at the assembly plant. As a result, there can be substantially more clearance between the steering rack and the collar than the design clearance. This could eventually result in the input shaft separating from the rack with subsequent loss of steering capability. Correction: Steering rack input shaft collar will be inspected for proper positioning and repositioned if necessary.
Select Another Vehicle