Explore BMW X4

Photos

Reviews and News

View All Articles

Owner Scores

This vehicle has not yet been reviewed

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2024-468
Recall date
2024-08-13
System affected
Engine
Model year(s) affected
2015 2016 2017 2018
Manufacturer Recall Number:
11 83 24RC
Units Affected:
78,381
Notification Type:
Safety Mfr
Issue: On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit. Safety Risk: A short circuit can create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, BMW advises you to park your vehicle outdoors and away from other vehicles or structures until the recall repairs are completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the water pump and electrical connector. The dealer will also install a shield on the connector.
Recall number
2023-646
Recall date
2023-12-06
System affected
Powertrain
Model year(s) affected
2023
Manufacturer Recall Number:
24 82 23RC
Units Affected:
79
Notification Type:
Safety Mfr
Issue: On certain vehicles, the integrated transmission control unit (ITCU) may not be sealed properly. As a result, transmission oil could leak into the unit and cause the transmission gears to seize. If this happens, there could be a loss of power to the wheels. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the ITCU. The dealer will also inspect the transmission fluid and replace it, if necessary.
Recall number
2023-614
Recall date
2023-11-16
System affected
Steering
Model year(s) affected
2024
Manufacturer Recall Number:
32 84 23RC
Units Affected:
22
Notification Type:
Safety Mfr
Issue: On certain vehicles, the steering gear may not have been manufactured properly. As a result, the steering gear could fail and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the steering gear.
Recall number
2021-517
Recall date
2021-08-18
System affected
Label
Model year(s) affected
2022
Manufacturer Recall Number:
71 80 21RC
Units Affected:
2
Notification Type:
Compliance Mfr
Issue: The tire and loading information label on a small number of vehicles lists the wrong tire size and recommended tire inflation pressures. As a result, if the owner's manual isn't consulted, a person may not properly inflate the tires. This could lead to poor handling and/or a tire failure. In addition, when the tires are replaced, the wrong tires could be installed. Safety Risk: Poor handling or a tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: None of the affected vehicles have been sold to retail customers. BMW will instruct dealers to replace the tire and loading information label before each vehicle is sold.
Recall number
2021-479
Recall date
2021-08-03
System affected
Brakes
Model year(s) affected
2020 2021
Manufacturer Recall Number:
12 84 21RC
Units Affected:
3,506
Notification Type:
Safety Mfr
Issue: On certain vehicles, a software problem could cause the vacuum pump to be damaged during engine starting. If this happens, there could be a loss of brake assist. This can cause an increase in brake pedal effort and increase the distance needed to stop the vehicle. Safety Risk: A sudden increase in brake pedal force could lead to an increased stopping distance. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to update the engine management software.
Recall number
2021-419
Recall date
2021-07-08
System affected
Airbag
Model year(s) affected
2019
Manufacturer Recall Number:
52 82 21RC
Units Affected:
14
Notification Type:
Safety Mfr
Issue: On certain vehicles, the seat trim may not be properly attached to the front passenger seat. Over time, this could cause the occupant classification system (OCS) not to work properly. If this happens, the airbag system can turn off the passenger-front airbag even when an adult is sitting in the seat. Safety Risk: In a crash where an airbag is required, an airbag that does not inflate could increase the risk of injury for an adult passenger. Corrective Action: BMW will notify owners by mail and instruct you to make an appointment with a dealer to replace the front passenger seat cushion (including the occupant classification system).
Recall number
2019-480
Recall date
2019-10-01
System affected
Visual System
Model year(s) affected
2019 2020
Manufacturer Recall Number:
66 82 19RC
Units Affected:
14,323
Notification Type:
Compliance Mfr
Issue: On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed.
Recall number
2019-177
Recall date
2019-04-11
System affected
Airbag
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
2
Notification Type:
Safety Mfr
Issue: On certain vehicles, the instrument trim panel could cause the passenger-front airbag not to deploy properly in a crash. Safety Risk: A passenger-front airbag that does not work properly could cause increased injuries in a crash. Corrective Actions: BMW dealers will replace the instrument trim panel prior to vehicle sale.
Recall number
2018-497
Recall date
2018-09-13
System affected
Engine
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
1,313
Notification Type:
Safety Mfr
On certain vehicles, a crankshaft sensor error may cause the engine to stall. This would result in a loss of motive power, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the crankshaft sensor. Note: This condition would result in the illumination of the check engine warning lamp and an “engine malfunction” message appearing in the instrument cluster. Note: This is an expansion of recall 2018-373.
Recall number
2018-366
Recall date
2018-07-06
System affected
Brakes
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
779
Notification Type:
Safety Mfr
On certain vehicles, a problem with the rear brake system may cause gas bubbles to form in the brake fluid. This could cause a soft brake pedal feel and a reduction in brake performance, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will bleed the rear brakes.
Recall number
2016-461
Recall date
2016-09-21
System affected
Airbag
Model year(s) affected
2015
Manufacturer Recall Number:
Units Affected:
395
Notification Type:
Safety Mfr
On certain vehicles, the housing of the driver's frontal airbag inflator may have been incorrectly welded during manufacturing and could separate from the base plate during an airbag deployment. If the vehicle were involved in a collision that warrants airbag deployment, metal fragments could be propelled toward vehicle occupants, which could increase the risk of injury. Correction: Dealers will replace the driver's frontal airbag.
Recall number
2016-242
Recall date
2016-05-20
System affected
Seats And Restraints
Model year(s) affected
2015 2016 2017
Manufacturer Recall Number:
Units Affected:
30,023
Notification Type:
Safety Mfr
On certain vehicles, the lower anchor bars that are used for installing child seats using the European-ISOFIX-type rigid-style connector may become damaged during vehicle operation. If the lower anchorage bar(s) were to become damaged, this would increase the risk of injury to a child seated in a child seat using this style of connector if involved in a crash. Correction: Dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body. Note: Child restraint systems using LATCH-type flexible style connectors, which reflect the vast majority of child restraint systems used in Canada, do not cause this issue.
Select Another Vehicle
Search now